Skip to main content

VM User Issue In Unix



Note:--Some times you will get vmuser related issues in general VM servers.
this is due to miss configurations of the file.
Below are the steps to fix this issue.
=======================================================
he /etc/init directory contains the configuration files.
The vmware-tools script is in the /etc/init/vmware-tools.conf file.
o work around this issue, you can manually start, stop, or restart VMware Tools with the commands:
/etc/vmware-tools/services.sh start
/etc/vmware-tools/services.sh stop
/etc/vmware-tools/services.sh restart
Note: You can also run the commands from the vmware-tools.conf file
To verify the status of VMware Tools, use the command:
status vmware-tools
– Linux:
/etc/vmware-tools/tools.conf
Put the following into the file:
[logging]
log = true
# Enable tools service logging to vmware.log
vmsvc.level = debug
vmsvc.handler = vmx
# Enable new “vmusr” service logging to vmware.log
vmusr.level = error
vmusr.handler = vmx
# Enable “Volume Shadow Copy” service logging to vmware.log
vmvss.level = debug
vmvss.handler = vmx
Then restart VM Tools



If some case it might not work, on that case you need to reboot the server
By:
Bibhuti Bhusan

Comments

Post a Comment

Popular posts from this blog

HP SMART ARRAY CLI COMMANDS

Show configuration : /opt/hp/hpssacli/bin/hpssacli ctrl all show config Controller status /opt/hp/hpssacli/bin/hpssacli ctrl all show status Show detailed controller information for all controllers /opt/hp/hpssacli/bin/hpssacli ctrl all show detail Show detailed controller information for controller in slot 0 /opt/hp/hpssacli/bin/hpssacli ctrl slot=0 show detail Rescan for New Devices /opt/hp/hpssacli/bin/hpssacli rescan Physical disk status /opt/hp/hpssacli/bin/hpssacli ctrl slot=0 pd all show status Show detailed physical disk information /opt/hp/hpssacli/bin/hpssacli ctrl slot=0 pd all show detail Logical disk status /opt/hp/hpssacli/bin/hpssacli ctrl slot=0 ld all show status View Detailed Logical Drive Status /opt/hp/hpssacli/bin/hpssacli ctrl slot=0 ld 2 show Create New RAID 0 Logical Drive /opt/hp/hpssacli/bin/hpssacli ctrl slot=0 create type=ld drives=1I:1:2 raid=0 Create New RAID 1 Logical Drive /opt/hp/hpssacli/bin/hpssacli ctrl slot=0 create type=ld dri...
Post a Comment
Read more

Monthly Mksys OS backup AIX

Step-1 Estimate Backup: ================================================================= df -tk `lsvgfs rootvg` | awk ‘{total+=$3}\ END {printf “Estimated mksysb size: %d bytes, %.2f GB\n”, total*1024, total/1024/1024}’ It will give you the estimated time of backup, Step-2 Backup Command: backupios -file /home/padmin/28August2013_TESTVIOI_mksysb ===============> VIO Backup Command mksysb -e -i -X /mksysb/10Nov2013_server-1_mksysb============================>AIX server Backup command Step-3 ================= Pre -checks: => check NFS FS size(Backup file) and root vg FS sizes . Note : if any FS Full Zip old logs => To check performance of the server => To check root VG FS => To check /etc/exclude ========================== Step-4 ================================ server-1 mksysb -e -i -X /mksysb/02March2014_server-1_mksysb server-2 mksysb -e -i -X /mksysb/02March2014_sever-2_mksysb Post checkups: ==> check the process running o...
Post a Comment
Read more

HP proliant SERVER hardware commands

to check the failed disk, adapter, any physical component on hp prolient server use the below important command. # hpacucli controller all show config———-to See the failed disk in HP proliant server  Smart Array P410i in Slot 0 (Embedded) (sn: 500143802590F6C0) logicaldrive 1 (558.9 GB, RAID 1, Interim Recovery Mode) array A (SAS, Unused Space: 0 MB) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 600 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 600 GB, Failed)====>indicating the faild drive SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 (WWID: 500143802590F6CF) [root@TEST:/root]# hpacucli ctrl slot=0 show Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 500143802590F6C0 Cache Serial Number: PBCDH0CRH1Z6R3 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: C Firmware Version: 6.60 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Autom...
Post a Comment
Read more